Kia Optima Hybrid: Automatic Transaxle System

Delivery Pipe Repair procedures

Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line” in this group). ...

General Safety Information and Caution

Safety Precaution     Since hybrid vehicles contain a high voltage battery, if the high voltage system or vehicles are handled incorrectly, this might lead to a serious accidents like electric ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Inhibitor Switch Repair procedures

Inspection     • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Power Circuit Inspection 1. Disconnect the Inhibitor switch connector (A). 2. Ignition KEY "ON" & Engine "OFF". 3. Measure voltage between supplied ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Manifold Absolute Pressure Sensor (MAPS) Description and Operation

Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional to the pressure to the ECM. By using this signal, the ECM calculates the intake air quantity ...