Kia Optima Hybrid: Automatic Transaxle Control System / Engine Clutch Control Solenoid Valve (E/C_VFS) Specifications

Specifications
Direct control VFS [E/C]
Control type : Normal low type
Control Pressure kpa
(kgf/cm?, psi)
9.81 ~ 500.14
(0.1 ~ 5.1, 1.42 ~ 72.54)
Current value (mA)
50~850
 Internal resistance (?)
5.1

Engine Clutch Control Solenoid Valve (E/C_VFS) Description and Operation

Description Engine clutch control solenoid valve (E/C_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure to the engine clutch. ...

Engine Clutch Control Solenoid Valve (E/C_VFS) Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Panoramaroof Motor Repair procedures


Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim. (Refer to the BD group - "Roof trim") 3. Disconnect the panoramaroof motor (A) connector. 4. Ground the terminals as below table, and check that the panoramaroof unit operates.     – When inspecting the panoramaroof ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Cylinder Block Repair procedures


Disassembly     • Use fender covers to avoid damaging painted surfaces. • To avoid damaging the cylinder head, wait until the engine coolant temperature drops below normal temperature before removing it. • When handling a metal gasket, take care not to fold the gasket or damage the contact ...

© 2025 Copyright www.koptimatfhev.com