Kia Optima Hybrid: Hydraulic System / Valve Body Description and Operation

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual / Automatic Transaxle System / Hydraulic System / Valve Body Description and Operation

Description

The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regulator valves, oil redirection valves, shift valves, and manual valves. The body also features electronic solenoid valves that ensure smooth gear changes.

Fluid Repair procedures

Inspection ATF level Check When checking the ATF level, be careful not to enter dust, foreign matters, etc. from fill hole. 1. Remove the air duct (A). 2. Remove the eyebolt (A). 3. Add ATF ...

Valve Body Components and Components Location

Component Location 1. Automatic transaxle2. Valve body assembly Component 1. Pressure Control Valve(PCV) adjust screw8. Underdrive Brake Control Solenoid Valve(UD/B)2. Solenoid valve bracket9. 26 Brake ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Blind Spot Detection Variant Coding Description and Operation

Description The used radar frequency of BSD is two, "North America region" and "Except North America region". If it replaces BSD unit, BSD unit has to perform the procedure of variant coding. BSD Variant Coding 1. Select the "BSD Variant Coding" procedure in BSD system. 2. Perform the "BSD Variant Coding" ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Front Driveshaft Repair procedures

Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove wheel nuts, front wheel and tire from front hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the wheel nuts when ...