Kia Optima Hybrid: Body (Interior and Exterior)

Electric Parking Brake (EPB) Repair procedures

Removal EPB Unit 1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Disconnect the EPB control unit connecter (A). 3. Remove the EPB control unit mounting nuts (B) and the EPB control ...

General Safety Information and Caution

Safety Precaution     Since hybrid vehicles contain a high voltage battery, if the high voltage system or vehicles are handled incorrectly, this might lead to a serious accidents like electric ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Temperature Control Actuator Repair procedures


Inspection 1. Ignition "OFF" 2. Disconnect the connector of temperature control actuator. 3. Verify that the temperature control actuator operates to the hot position when connecting 12V to the terminal 3 and grounding terminal 7. Verify that the temperature control actuator operates to the cool position ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rear Hub - Carrier Repair procedures


Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove wheel nuts, rear wheel and tire from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage to the wheel nuts when removing ...

© 2025 Copyright www.koptimatfhev.com