Replacement Seat Assembly Replacement 1. Remove the rear seat cushion (A). 2. Disconnect the rear seat heater connectors (A). 3. After loosening the mounting bolts, then remove the rear seat back (A). ...
Components 1. Front seat belt2. Height adjuster3. Rear seat belt [RH]4. Rear center seat belt5. Rear seat belt [LH]6. Rear seat belt buckle ...
Specifications Type: Hall effect sensor Operation condition (°C)°F((-)40 ~ 150)) -104 ~ 302Air gap(mm)in.(0.25 ~ 1.9)0.00984 ~ 0.0748Output voltageHigh1.18 ~ 1.68Low0.59 ~ 0.84 ...
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Pressure [kPa (kgf/cm?, in H2O)Output Voltage (V)-6.67 (-0.068, -26.8)0.502.5+6.67 (0.068, 26.8)4.5 Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Lift ...