Kia Optima Hybrid: Engine Electrical System
Removal and Installation 1. Remove the front muffler (A). Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft) 2. Remove the catalytic converter (A). Tightening torque: 39.2 ~ 58.8 N.m ...
Safety Precaution Since hybrid vehicles contain a high voltage battery, if the high voltage system or vehicles are handled incorrectly, this might lead to a serious accidents like electric ...
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end of the PCV valve and make sure that intake manifold vacuum can be felt. The plunger inside ...
Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ...
Muffler Repair procedures
General Safety Information and CautionOther information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Repair procedures
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Seat Belt Buckle Switch (BS) Description and Operation