Removal 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~107.9 N.m(9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft) 2. Remove the rear upper arm (A). 3. Loosen the hose eyebolt (C) and caliper mounting ...
Components 1. Front wheel speed sensor connector2. Front wheel speed sensor ...
Inspection 1. Ignition "OFF" 2. Disconnect ambient temperature sensor. 3. Check the resistance of ambient temperature sensor between terminals 1 and 2 whether it is changed by changing of the ambient temperature. 1. Sensor Ground2. Ambient Sensor Signal Specification Ambient temperature [°C(°F)]Resistance ...
Side Body A Front side member tooling hole (O20)Fender apron tooling hole (O10)Front door upper hinge mounting hole (O13)Front door lower hinge mounting hole (O13)Fender panel mounting hole (O6.6)Rear door upper hinge mounting hole (O13)Rear door lower hinge mounting hole (O13)Rear door switch mounting ...