Kia Optima Hybrid: ESC(Electronic Stability Control) System / ESC OFF Switch Repair procedures
| Inspection |
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable. |
| 2. |
Remove the crash pad side switch assembly.
|
| 3. |
Check the continuity between the switch terminals as the ESC OFF switch is engaged.
|
ESC OFF Switch Description and Operation
Description 1. The ESC OFF switch is for the user to turn off the ESC system. 2. The ESC OFF lamp is on when ESC OFF switch is engaged. ...
Steering Angle Sensor Description and Operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning direction ...
Other information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rear Shock Absorber Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) Be careful not to damage the hub bolts when removing the rear wheel & tire. 2. Loosen the bolt & nut and then disconnect the shock absorber (A) from the rear axle. ...
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Filler-Neck Assembly Repair procedures
Removal 1. Lift the vehicle. 2. Disconnect the fuel filler hose (A). 3. Disconnect the ventilation hose (B) from the fuel tank air filter. 4. Open the fuel filler door and then remove the filler-neck installation screw (A). 5. Remove the rear-LH wheel, tire, and the inner wheel house. 6. Remove the filler-neck ...