Kia Optima Hybrid: Engine Control System / Injector Specifications

Specification
Item
Specification
Coil Resistance (?)
13.8 ~ 15.2 [20°C(68°F)]

Injector Description and Operation

Description Based on information from various sensors, the ECM can calculate the fuel amount to be injected. The fuel injector is a solenoid-operated valve and the fuel injection amount is controlled by ...

Injector Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Temperature Control Actuator Repair procedures


Inspection 1. Ignition "OFF" 2. Disconnect the connector of temperature control actuator. 3. Verify that the temperature control actuator operates to the hot position when connecting 12V to the terminal 3 and grounding terminal 7. Verify that the temperature control actuator operates to the cool position ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Repair procedures


Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end of the PCV valve and make sure that intake manifold vacuum can be felt.     The plunger inside ...

© 2025 Copyright www.koptimatfhev.com