Kia Optima Hybrid: Heating,Ventilation, Air Conditioning / Special Service Tools
| Personal Protective Equipment |
| Name | Illustration | Description |
| Insulation glove |
| Used when inspecting or working on the high voltage components [Insulation performance : 1000V / 300A or above] |
| Insulation shoes |
| Used when inspecting or working on the high voltage components |
| Insulation clothes |
| |
| Insulation helmet |
| |
| Safety glasses |
| Used in the case below • During Removal & installation or inspection of the high voltage battery terminals or wiring, which spark might happen. • During working on the high voltage battery pack assembly. |
| Face shield |
| |
| Insulation mat |
| Putting the removed high voltage components on the insulation mat to prevent safety accidents. |
| Insulation sheet |
| Covering
the high voltage components with insulation sheet to prevent people who
don’t wear the personal protective equipment from safety accidents. |
Specifications
Specification Air Conditioner ItemSpecificationCompressorTypeESC33iOil type & CapacityPOE OIL 3.8~4.5oz. (115~135cc)Motor typeBLDCDisplacement33cc/revCondenserHeat rejection14,000 ± 5% kcal/hrA/C ...
Troubleshooting
Troubleshooting Problem Symptoms Table Before replacing or repairing air conditioning components, first determine if the malfunction is due to the refrigerant charge, air flow or compressor. Use the table ...
Other information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rear Cross Member Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) Be careful not to damage the hub bolts when removing the rear wheel & tire. 2. Remove the rear lower arm. (Refer to lower arm) 3. Remove the rear shock absorber. (Refer ...
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Description and Operation
Description Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are preprogrammed in the memory of the ECM (Engine Control Module). The engine operating conditions (speed, load, warm-up condition, ...