Kia Optima Hybrid: Back view camera System / Schematic Diagrams
| Circuit Diagram |
Components and Components Location
Component Location 1. Back view camera2. AVN monitor ...
Repair procedures
Removal Back View Camera 1. Disconnect the negative(-) battery terminal. 2. Open the trunk and remove the trunk door trim. (Refer to the BD group - "Trunk") 3. Disconnect the back view camera connector(A). ...
Other information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Fuel Tank Pressure Sensor (FTPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Pressure [kPa (kgf/cm?, in H2O)Output Voltage (V)-6.67 (-0.068, -26.8)0.502.5+6.67 (0.068, 26.8)4.5 Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Lift ...
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Crankshaft Position Sensor (CKPS) Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Disconnect the crankshaft position sensor connector (A). 3. Remove the protector (A). 4. Remove ...