Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the crash pad side cover (A). 3. After loosening the mounting screws, then remove the crash pad lower ...
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to the BD group - "Crash pad") 3. Remove the steering column upper and lower shrouds. (Refer ...
Troubleshooting SymptomProbable causeRemedyPlay in steeringLoose yoke plugRetightenLoose steering gear mounting boltsRetightenLoose or worn tie rod endRetighten or replace as necessarySteering wheel does not return properlyExcessive turning resistance of tie rod endReplaceYoke plug excessively tightAdjustTie ...
Inspection Power Relay Test (Type A) – Do not use pliers. – Pliers will damage the relays, which could cause the engine to stall or not start. – Carefully remove the relay using the relay puller. Check for continuity between the terminals. A : Rear defogger relay B : EWP relay C : ...