Description |
Never attempt to measure the circuit resistance of the airbag
module even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury. |
Removal The side airbag cannot be disassembled from the seat back assembly, so replace the seat back assembly when replacing the side airbag. 1. Disconnect the battery negative cable and ...
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specification. Specification: 6.9 ~ 7.9? [20°C(68°F)] Removal 1. Turn the ignition switch OFF and disconnect the battery negative ...
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the rear seat. (Refer to the BD group - "Rear seat") 3. Remove the package tray trim (A). (Refer to the BD group -"Interior trim") 4. Remove the soundproofing felt (A) to remove the wiring. 5. Remove the high mounted stop lamp after removing ...