Kia Optima Hybrid: BCM (Body Control Module) / Body Control Module (BCM) Specifications
| Specifications |
| Items | Specifications |
| Rated voltage | DC 12V |
| Operating voltage | DC 9 ~ 16V |
| Operating temperature | -22°F~176°F(-30°C~ 80°C) |
| Dark current | BCM & Receiver : 5.5mA BCM : 4mA |
Body Control Module (BCM) Components and Components Location
Components Connector Pin Information No.Connector A (24pin)Connector B (20pin)Connector C (24pin)1Battery (+)Head lamp low beam switchRoom lamp2IGN 1Head lamp high beam switchAV tail signal3IGN 2Front ...
Other information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rear Hub - Carrier Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove wheel nuts, rear wheel and tire from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the wheel nuts when removing ...
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Compression Test
Compression Pressure Inspection If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. Engine may start anytime the vehicle is in READY mode.1. Warm up and stop engine. 1. Warm up and stop engine. Allow the engine to ...