Troubleshooting 1. The lamp switch inputs can be checked using the GDS. 2. To check the input value of lamp switch, select option "Body Control Module". 3. To consult the present input/output value of ...
Specifications ItemsSpecificationsRated voltage5VLoadMax. 1mA (When head lamp lighting)Illuminations (LUX)501.42 ± 0.31V1002.63 ± 0.58V1503.84 ± 0.84V ...
Removal 1. Lift the vehicle. 2. Disconnect the fuel filler hose (A). 3. Disconnect the ventilation hose (B) from the fuel tank air filter. 4. Open the fuel filler door and then remove the filler-neck installation screw (A). 5. Remove the rear-LH wheel, tire, and the inner wheel house. 6. Remove the filler-neck ...
Inspection First Seat Heater 1. Check for continuity and measure the resistance between No.4 and No.6 terminals. [Cushion] No.DescriptionNo.Description1Heater (-)3NTC (+)2NTC (-)4Heater (+) [Back] 2. Measure the resistance between No.1 and No. 4 in the A connector to check the cushion and back heater. ...